Tech Tip #166: Block Heaters, Glow Plugs, and Immersion Heaters for your Perkins, Deutz or Ford Industrial Engine

Dr. Diesel
Written by Dr. Diesel

Share

You don’t have to be Frank Sinatra to know that this is one of the coldest winters we’ve seen in a while. But we can help.

We have block heaters for most Perkins engines.  You pop out a freeze plug, insert the heater and then plug it into 110 wall outlet. Now your engine will be warm and toasty. It will last a lot longer, too!

Having a hard time starting your 100 Series Perkins? We’re running a special on glow plugs. We have glow plugs for the popular HP, HR, KC, KD and other Perkins engines available!

Running a Deutz 912/913 engine?  We have immersion heaters for these air cooled engines.  Running a Deutz 1012, 1013 or 2013?  We have heaters for these also.

Maybe you’re running a Ford 300 in a Marine Travelift or a wood chipper? We have block heaters for these too.

Share

Dr. Diesel
Written by Dr. Diesel
Knowledge is power. Power to build ties to engine users. To build a relationship with our customers, we share with you our 105 years of knowledge in many ways. We have this special section called “Ask Dr. Diesel™” where you can pose questions about engines, transmissions, industrial hand clutches, exhaust scrubbers, etc.
×