Auto Clutch Owners Manual 2012

Share

Industrial Spring Loaded PTO  HD1300 & HD1300XT Product Manual

General Information

The AUTO Mfg. Inc. clutch and PTO is a heavy-duty assembly capable of providing full engine horsepower from the PTO output shaft. Designed for use on both gasoline and diesel engines, the main components for each engine are the same.

Three models of the clutch and PTO are available:
HD1300 PTO
The HD1300 provides a 1¾” output shaft for use on gasoline and diesel engines. This assembly incorporates three heavy-duty ball bearings (one at the front and two at the rear of the housing), 1 3/8” splined shaft, with hardened spline and bearing journals.

The 13” clutch disc with 1 3/8” heat treated splined hub and ceramic metallic pads is designed for medium-duty industrial applications up to 120hp.

The industrial style pressure plate incorporates 12 springs providing a clamping force of 1825 lbs.

HD1300XT150
The HD1300XT150 provides a 2¼” output shaft with hardened spline and journals for use on diesel engines up to 150hp. The PTO assembly utilizes a 2 row heavy-duty ball bearing at the rear and a single row ball bearing at the front of the PTO housing.

The 13” clutch disc with 1½” heat treated splined hub and ceramic metallic pads is designed for heavy-duty industrial applications up to 150hp.

The industrial style pressure plate incorporates 12 springs providing a clamping force of 1825 lbs. An optional heavy duty pressure plate with 16 springs and 2425 lbs. of clamp load is also available.

HD1300XT175
The HD1300XT175 provides a 2¼” output shaft with hardened spline and journals and is recommended for use on diesel engines
from 140hp to 180hp used in heavy duty industrial application. The PTO assembly utilizes a 2 row heavy-duty ball bearing at the rear and a single row ball bearing at the front of the PTO housing.

The 13” clutch disc with 1¾” heat treated splined hub and ceramic metallic pads, and the heavy duty pressure plate providing 2425 lbs. of clamp load allows this PTO assembly to be used in heavy-duty applications up to 175hp.

PTO Shaft Pilot Bearing
The PTO output shaft in all models is centered into a pilot bearing located in the engine flywheel.

PTO and Clutch Assemblies
The PTO and clutch assemblies are designed for use on either in-line or belt driven applications. A drive shaft utilizing universal joints must be used with in-line installations to compensate for engine and driven unit misalignment.

Technical and Application Requests
For all of your questions, please contact Foley Engines at 1.800.233.6539 or 508.753.2979. We are here to help you with all of your AutoClutch needs!

Download the full Owners Manual below

https://www.foleyengines.com/wp-content/uploads/2017/02/AutoClutchManual2012-2.pdf

Share

×