Identifying the Ford Dover and Dorset Engines:
Five Easy Ways to Tell the Dover and Dorset Apart

This Tech Tip, one in a series we publish for industrial engine owners and rebuilders, sorts out the differences between the Ford Dover and the Ford Dorset industrial diesel engines. We take our responsibilities to the overall engine community very seriously. We hope that our Tech Tips add to the common base of knowledge about industrial engines as well as advance the industrial engine remanufacturing profession.

The Ford Dover and Dorset industrial engines have had a long history here in the US. Many OEMs have used them and we see them now primarily in screening plants, gravel crushers, etc. One problem that often comes up is how to identify the Ford Dorset and Ford Dover engines. After all, these Ford industrial engines look similar. In fact, they are both English made, are four cylinders, are each named for the English city they were originally built in, and have the same 254 cubic inch displacement. Moreover, the Ford Dover and Ford Dorset even share the same crankshaft, camshaft, and connecting rods. But there are some major differences in other internal parts and the Ford Dorset and Ford Dover engines themselves are not interchangeable.

If these Ford four cylinder diesel engines have the same number of cylinders, cubic inch displacement and both were made in England, how do you tell them apart?

Here are five easy ways how to tell them apart:

                                          DOVER                            DORSET

Ford Model #                  2722 E                               2711

Note: Model Number can be found on the valve cover

time sequence               later                                  earlier

timing gears                   straight cut                        angle cut

head size                        larger with                         smaller
                                         larger ports

casting ##                     826F6015                           703F6015

Note: the above casting numbers are 3/4" to 1" high
and located on the left hand side (as viewed from the
rear of the Ford industrial diesel) near the starter
motor.

Please call us with any questions. Foley Engines has long been an authorized Ford Industrial Engine dealer. Founded in 1916, Foley is perhaps the oldest engine distributor in North America. We stock both parts as well as remanufactured Ford Dover and Ford Dorset industrial engines.